Lubricious Moisturizing Lotion
ARL-20-27-09
INGREDIENT: | % W/W | ||
---|---|---|---|
PHASE A | |||
Pelemol GTO¹ (Triethylhexanoin) | 3.50 | ||
Pelemol GTIS¹ (Triisostearin) | 2.00 | ||
Pelemol 899¹ (Isononyl Isononanoate (and) Ethylhexyl Isononanoate) | 3.50 | ||
Pelemol ICB¹ (Isocetyl Behenate) | 3.00 | ||
Pelemol TMPIS (Trimethylolpropane Triisostearate) | 2.00 | ||
Pelemol DISM¹ (Diisostearyl Malate) | 3.50 | ||
Pecosil FSL-300¹ (Perfluorononyl Dimethicone) | 0.75 | ||
Phoenoxol T¹ (Cetearyl Alcohol (and) Steareth-30 (and) Ceteth-10) | 4.00 | ||
Alfol 1618² (Cetearyl Alcohol) | 1.00 | ||
Vitamin E Acetate³ (Tocopheryl Acetate) | 0.50 | ||
PHASE B | |||
Water | 45.25 | ||
Versene NA24 (Disodium EDTA) | 0.10 | ||
Keltrol T5 (Xanthan Gum) | 0.20 | ||
Actiphyte of White Tea6 (Glycerin (and) Camellia Sinensis Leaf Extract) | 1.00 | ||
PHASE C | |||
Water | 20.00 | ||
RITA Glycerin USP Kosher7 (Glycerin) | 1.00 | ||
Phoenoxide E-400¹ (PEG-400) | 3.00 | ||
Pecogel H-12/A¹ (Water (and) VP/Polycarbamyl Polyglycol Ester) | 0.40 | ||
PHASE D | |||
Sepiplus S8 (Hydroxyethyl Acrylate/Sodium Acryloyldimethyl Taurate Copolymer (and) Polyisobutene (and) PEG-7 Trimethylolpropane Coconut Ether) | 1.00 | ||
PHASE E | |||
Propylene Glycol9 (Propylene Glycol) | 3.00 | ||
Dry Flo PC10 (Aluminum Starch Octenylsuccinate) | 1.00 | ||
Preservative | Q.S. | ||
TOTAL | 100 |
- PHOENIX CHEMICAL, Inc.
- Sasol Chemicals
- BASF Care Creations
- Dow Chemical
- C.P. Kelco Co.
- Lipotec S.A.U.
- RITA Corporation
- Seppic
- Vigon
- Nouryon
PROCEDURE:
Phase A: In side mixing vessel, combine Phase A and heat to 70-75°C, mixing until uniform.
Phase B: Charge Phase B water into main mixing vessel and heat to 70-75°C. Add disodium EDTA and extract and mix until uniform. While maintaining heat, add xanthan gum and mix until phase is homogenous.
Phase C: Combine Phase C in side vessel, heat to 70-75°C and mix until uniform. Add Phase C to Phase B and mix thoroughly. While maintaining temperature, add Phase A to Phases B/C with high speed mixing.
Phase D: Add Phase D to emulsion and mix until homogenous. Cool to 30°C.
Phase E: Pre-mix propylene glycol with Dry Flo PC into a slurry. Add slurry to emulsion and mix until uniform. Add preservative and mix thoroughly until homogenous while cooling to room temperature.
INGREDIENT | FUNCTION |
---|---|
Pelemol GTO | Light, very emollient, non-tacky ester with light cushion and spreadability |
Pelemol GTIS | Lubricious emollient, good cushion, substantive to skin |